An Arduino sketch to operate a SI4705 chip based radio using the Radio library. More...

#include <Arduino.h>
#include <Wire.h>
#include <radio.h>
#include <RDA5807M.h>

Macros
#define	FIX_BAND RADIO_BAND_FM
	The band that will be tuned by this sketch is FM. More...

#define	FIX_STATION 8930
	The station that will be tuned by this sketch is 89.30 MHz. More...

#define	FIX_VOLUME 4
	The volume that will be set by this sketch is level 4. More...

Functions
void	setup ()

void	loop ()
	show the current chip data every 3 seconds. More...

Variables
RDA5807M	radio

Detailed Description

An Arduino sketch to operate a SI4705 chip based radio using the Radio library.

Author: Matthias Hertel, http://www.mathertel.de

Copyright: Copyright (c) 2014 by Matthias Hertel.
This work is licensed under a BSD style license. See http://www.mathertel.de/License.aspx

This sketch implements a "as simple as possible" radio without any possibility to modify the settings after initializing the chip.
The radio chip is initialized and setup to a fixed band and frequency. These settings can be changed by modifying the FIX_BAND and FIX_STATION definitions.

Open the Serial console with 57600 baud to see the current radio information.

Wiring

The RDA5807M board/chip has to be connected by using the following connections:

Arduino UNO pin	Radio chip signal
3.3V (red)	VCC
GND (black)	GND
A5 or SCL (yellow)	SCLK
A4 or SDA (blue)	SDIO

The locations of the pins on the UNO board are written on the PCB. The locations of the signals on the RDA5807M side depend on the board you use.

More documentation and source code is available at http://www.mathertel.de/Arduino

ChangeLog:

05.12.2014 created.
19.05.2015 extended.

Macro Definition Documentation

#define FIX_BAND RADIO_BAND_FM

The band that will be tuned by this sketch is FM.

#define FIX_STATION 8930

The station that will be tuned by this sketch is 89.30 MHz.

#define FIX_VOLUME 4

The volume that will be set by this sketch is level 4.

Function Documentation

void loop ( )

show the current chip data every 3 seconds.

void setup ( )

Setup a FM only radio configuration with some debugging on the Serial port

Variable Documentation

RDA5807M radio

Macros